Subsoil Geotechnical Evaluation for the Design and Construction River Bridge Along Onuinyang Ikuano Road, Bende LGA, Abia State, Nigeria

This study investigates the ground condition and engineering properties of the subsurface soils along Onuiyang Ikuano Road in Bende LGA, Abia State, Nigeria using geotechnical method. The aim is to determine geotechnical parameters for the design and construction of the abutement and pier of a river bridge to link two sections of the road. The investigation adopted both field methods which included boring, soil sampling and SPT, and laboratory tests to determine moisture content, Atterberg limits, particle size distribution, soil shear strength parameters such as cohesion and internal friction angle. The results indicated three (3) distinct lithologic units with varied thickness. They are soft to medium brown lateritic clay at the top followed by a loose to medium dense, fine to medium sand. The third layer is a medium dense, fine to medium sand. The SPT N-values varied from 6 to 27 at various depths. The moisture content ranged from 11.9 to 37.4%. The liquid limit varied between 20 – 42% while the plastic limit is between 9 and 31%. For the shear strength parameters, cohesion ranges from 56 to 69 KN/m3 with corresponding frictional angle of 8o to 9o respectively. A pile foundation to be founded at 20.0m depth was recommended based on the geotechnical information of the soil and in-situ densities of the soil. Allowable load carrying capacities of the piles were computed to be between 600.2 and 646.2 KN for 450mm diameter pile, and 1050.9KN and 1128.6 KN for a pile of 600mm diameter respectively. The study highlights the critical role of geotechnical surveys in design of safe, resilient and sustainable civil structures. However, it is recommended that the foundation engineer should confirm the proposed capacities and eventually design the foundation based on the specific loadings.

Geotechnical evaluation, pile foundation, soil shear strength, load carrying capacity, abutement and pier

1. Abam, T.K.S. (2017). Exploring ground conditions for sustainable building foundation design. Proceedings of the 2nd International Conference of the Nigeria Association for Engineering Geology and the Environment Lagos, 1:32-41. [Google Scholar] [Crossref]

2. Agbede, O.A., Oyediran, I.A. & Alawode, A.O (2014). Geotechnical properties of soils from the Niger Delta region of Nigeria. Geotechnical and Geological Engineering, 32(3), 649-658. [Google Scholar] [Crossref]

3. Agumanu, A.E. (1989). The Abakaliki and Ebonyi Formation: Subdivisions of the Albian Asu River Group in the Southern Benue Trough, Nigerian. Journal of African Earth Science, 195-207. [Google Scholar] [Crossref]

4. APHA 4500 (2018). Standard methods for the examination of water and wastewater. Washington DC: APHA Press. [Google Scholar] [Crossref]

5. Authony, T.B., Olufemi F. & Sunday, O.I. (2022). Geochemical studies of shakes from the Asu River Group, Lower Benue Trough: Implications for provenance and paleo-environmental reconstruction. Solid Earth Science, 7(1), 5-18. [Google Scholar] [Crossref]

6. Bell, F.G. (2011). Engineering geology. Elsevier Publishers. [Google Scholar] [Crossref]

7. Dickenson, D.H., Ifiok, M.B. & Iniemen, J.I. (2021). Foundation design consideration in marginal land of south-western Niger Delata, Nigeria. Journal of Applied Geology and Geophysics 9(1), 01-09. [Google Scholar] [Crossref]

8. Lan, L., Zhang, Q., Zhu, W., Ye., G., Shi, Y. & Zhu, H. (2022). Geotechnical characterization of deep shanghai clays. Engineering Geology, 307:106794. [Google Scholar] [Crossref]

9. Meyehof, G.G. (1988). Analysis of bearing capacity of shallow strip footing under loads inclined in the direction of footing length. Journal of Interdisciplinary Earth Sciences Research, 5:8-14 [Google Scholar] [Crossref]

10. Morrison, T. & Esonanjor, E.E. (2023). An evaluation of a marginal land’s geological engineering properties in Borikiri sandfill, Port Harcourt, Nigeria. Achieves of Current Research International, 23(4), 30-40. [Google Scholar] [Crossref]

11. Murphy, V.N.S. (2017). Soil mechanism and foundation engineering. Cbs Publishers. [Google Scholar] [Crossref]

12. Obeje, N.G. (2009). Geology and mineral resources of Nigeria. Lecture Notes in Earth Sciences. Springer-Verilog, 120:57-68. [Google Scholar] [Crossref]

13. Palmisano, F. & Rus, G. (2023). Geotechnical failures in construction: Causes, consequences, and prevention strategies. Geosciences, 13(2), 92. [Google Scholar] [Crossref]

14. Tomilinson, M.J. (2001). Foundation design and construction, (7th Ed). Pearson prentice Hall, Harlow. [Google Scholar] [Crossref]

15. Warmete, T. & Nwakoala, H.O (2018). Geotechnical Indications and shallow bearing capacities analysis. within Lekki Peninsula, Lagos. International Arch Env Ear Sci (IAEES), 104. [Google Scholar] [Crossref]

• Employee Suggestion Schemes as a Driver of Innovation and Value Creation in Organizations
• Profitability, Growth and Market Valuation of Leading Pharmaceutical Companies in India: A Comparative Financial Analysis
• Problems and Prospects of Sale Employees of Non-Banking Financial Companies
• Core Temperature Estimation and Thermal Management of Lithium-Ion Batteries Using a Nonlinear Adaptive Extended Kalman Filter
• A Conceptual Analysis of How Sustainable Public Procurement Practices Influence Value for Money in Developing Economies