Preparation and Characterization of Aluminium-Pillared Inter Layer Clay with 20% Ferric Chloride (FeCl2).
Article Sidebar
Main Article Content
Abstract: Mix Aluminium-Iron (80:20) pillared clay was prepared through pillarization method, after purification using standard method to reduce the amount of Quartz present. The procedures involved were purification, preparation of the pillaring solution, hydration of parent clay, calcinations, intercalation of Aluninium and Iron metal oxides as pillars. BET N2 absorption technique was employed in order to determine the surface area, pore volume and micropore volume which was found to be 6.929 (Å) 139.669 m2/g, 0.057 cc/g, 0.074 cc/g, respectively. The XRD analysis was also carried out to determine the minerals obtainable in the sample, which montmorillonite (Na,Mg and AlO3) and Quartz peak were observed at a relative intensity of 49.15 and 100% with d-spacing of 0.3073(Å) and 0.1023(Å) respectively.
Downloads
Downloads
References
Bulut G.M., Chimeddorj F,Esenli and Celik M.S, (2009) “Production of desiccants from Turkish bentonites”, Journal of Applied Clay Science, 46, 141–147. DOI: https://doi.org/10.1016/j.clay.2009.07.013
Celik H., (2010) “Technological characterization and industrial application of two Turkish clays for the ceramic industry”, Journal of Applied Clay Science, 50, 245–254. DOI: https://doi.org/10.1016/j.clay.2010.08.005
Simic V., P.Uhlik,(2006)“Crystallite size distribution of clay minerals from selected Serbian clay deposits”, Geological Analysis of Balkan Peninsula, 67,120–125. DOI: https://doi.org/10.2298/GABP0667109S
Karnland O, Olsson S, Nilssson U, (2006), Mineralogy and sealing properties of various bentonites and smectite-rich clay materials, 06-30.
Dharvsi Z, and Morsali A, Ultrasonics Sonochemistry, (2011), 18, 238 – 242. DOI: https://doi.org/10.1016/j.ultsonch.2010.05.012
Bergaya F, Theng B.K, Lagaly G, (2006), Handbook of Clay Science, Elsevier, Oxford UK.
SrindharPande, Mahesh D, Bedre C.D, MaduSoodana, Vankateramana A, (2011), Studies and characterization of Bentonite Clay obtained from Gulbarga Karnataka region, (5), 7, 297-301.
Ravindra Reddy T, Kaneko S, Endo T and Lakshmi Reddy S, (2017), Spectroscopic characterization of Bentonite, Journal of Lasers Optics and Photonics, (4), 3, 1-4.
Gong et al., (1999), Purification of raw Bentonite, Journal of applied clay science, 199, 294-300.
Katdare et al., (1999), Preparation of pillared clay, Catalysis today, 49, 313-320. DOI: https://doi.org/10.1016/S0920-5861(98)00438-6
Nino Rinaldi and AnisKristiani, (2017), Physicochemical of pillared clays prepared by several metal oxides, 1823, 2-8. DOI: https://doi.org/10.1063/1.4978136
Makmur Sirait, Nurdin Bukit and Nurdin Siregar, (2017), Preparation and characterization of natural bentonite into nanoparticles by co-precipitation method, Article of AIP conference proceedings, 1801, 1-2. DOI: https://doi.org/10.1063/1.4973084
Nadezda Stankovic, Mihovil Logar, Jelena Lucovic, Jelena Pantic, (2011), Characterization of Bentonite clay from "Greda" deposit, 5, (2), 97-101. DOI: https://doi.org/10.2298/PAC1102097S
Abdullahi S.L and Audu A.A, (2017), Comparative analysis on Chemical composition of Bentonite clays obtained from Ashaka and Tango deposits in Gombe state Nigeria, Journal of Chemsearch, 8, (2), 35-40.
Brunauer S., Deming L. S., Deming W. E and Teller E, (1940), On a theory of the van der Waals adsorption of gases, Journal of American Chemical Society, 62, 1723. DOI: https://doi.org/10.1021/ja01864a025
Volzone C., Thompson J. G., Melnitchenko A., Ortiga J., Palethorpe S. R. (1999), Selective gas adsorption by amorphous clay mineral derivative, Journal of Clays and Clay Minerals, 47, 5, 647-657. DOI: https://doi.org/10.1346/CCMN.1999.0470511
Wijaya S. R, and Rohman J. D, (2008), Modifikasi Bentonit (Clay) Menjadi Organoclay dengan Penambahan Surfaktan, Journal of Nano sians & Nanoteknologi, 48-51.
Fisli A, and Haeruddin H, (2002), Preparation and Characterization of Manganese Oxide Catalysts by Supporting Pillar Alumina Bentonite for Gas CO Oxidation, Proceedings of the Scientific Meeting of Science and Technology, 257-264.
This work is licensed under a Creative Commons Attribution 4.0 International License.
All articles published in our journal are licensed under CC-BY 4.0, which permits authors to retain copyright of their work. This license allows for unrestricted use, sharing, and reproduction of the articles, provided that proper credit is given to the original authors and the source.