Abstract
The work analyzed the composition and other physiochemical properties of liquefied petroleum gas (LPG mixture available in Bangladesh by cylinder. LPG Composition (C2-C6), Butadiene, Total Sulfur, Cu Corrosion, Relative Density and Vapor Pressure were determined by respective ASTM methods. Free water content was measured visually and odour tested by smell detection. Data from nine samples were used to compare with ASTM and Indian Standards. The results of this analysis revealed that the LPG contains propane and butane with a certain range of ratio. But that has no free water content. The total Sulfur content is within the permissible limit according to ASTM Standards. The samples do not have corrosive hydrogen sulfide. The vapor pressure is lower than the maximum limit and have very low linear relationship with relative density. The calorific value is highly dependent on the propane and butane content and moderately related to the relative density. Compared to ASTM and Indian standards, the examined LPG mixtures are found to be safe for the tropical country.
References
A. Safadoost, M. Davoodi, and S. A. A. Mansoori, “Preventing corrosion and tube failure in sulfur condenser during normal operation, startup, and shutdown of the south pars gas processing plant (case study),” J. Nat. Gas Sci. Eng., vol. 19, pp. 105–115, 2014.
G. E. Totten, R. Shah, and D. Forester, “Fuels and Lubricants Handbook: Technology, Properties, Performance, and Testing 2nd Edition,” 2019.
JICA, “Survey on Power System Master Plan,” Dhaka, 2016.
H. Unit, “Energy Scenario of Bangladesh 2021-22,” Dhaka, 2023. [Online]. Available: http://www.hcu.org.bd/site/view/publications/-
J. Uddin, “LPG operators seek policy backing to double industrial usage amid gas crisis,” The Business Standard, Dhaka, Dec. 26, 2023. [Online]. Available: https://www.tbsnews.net/bangladesh/lpg-operators-seek-policy-backing-double-industrial-usage-amid-gas-crisis-764278
H. Bauer, “Automotive Handbook 4th Edition, Robert Bosch GmBH, 1996,” ISBN 0-8376-0333.
O. Zivenko, “LPG ACCOUNTING SPECIFICITY DURING ITS STORAGE AND TRANSPORTATION,” Meas. Equip. Metrol., vol. 80, no. 3, pp. 21–27, 2019, doi: 10.23939/istcmtm2019.03.021.
M. Hossain, “Debate over LPG export,” Energy & Power Magazine, Dhaka, pp. 9–11, Oct. 2019. [Online]. Available: https://ep-bd.com/view/details/article/NDAxNQ%3D%3D/title?q=debate+over+lpg+export
R. Natarajan, N. S. Karthikeyan, A. Agarwaal, and K. Sathiyanarayanan, “Use of vegetable oil as fuel to improve the efficiency of cooking stove,” Renew. energy, vol. 33, no. 11, pp. 2423–2427, 2008.
A. D2163, “Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography,” Annu. B. Stand., 2017.
B. Guignon, C. Aparicio, and P. Sanz, “Volumetric Properties of Pressure-Transmitting Fluids up to 350 MPa: Water, Ethanol, Ethylene Glycol, Propylene Glycol, Castor Oil, Silicon Oil, and Some of Their Binary Mixture,” J. Chem. Eng. Data - J CHEM ENG DATA, vol. 55, Feb. 2010, doi: 10.1021/je9010568.
A. D1657-12, “Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer,” Annu. B. Stand., 2017, [Online]. Available: https://www.astm.org/d1657-12r17.html
A. D1267, “Standard Test Method for Gauge Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method),” Standards & Publications. [Online]. Available: https://www.astm.org/d1267-18.html
A. D1838, “Standard Test Method for Copper Strip Corrosion for Liquefied Petroleum Gases (LPG.),” Analytical, [Online]. Available: https://ayalytical.com/methods/astm-d1838/
ELGAS, “LPG Composition,” ELGAS Knowledge Hub. [Online]. Available: https://www.elgas.com.au/elgas-knowledge-hub/residential-lpg/lpg-composition/
Shivgas, “Maximising Energy Efficiency with LPG’s High Calorific Value.” [Online]. Available: https://shivgas.com/maximising-energy-efficiency-with-lpgs-high-calorific-value/
R. G. Montemayor, Ed., Distillation and Vapor Pressure Measurement in Petroleum Products. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2008. doi: 10.1520/MNL51-EB.
H. R. Mahdipoor and A. Dehghani Ashkezari, “Feasibility study of a sulfur recovery unit containing mercaptans in lean acid gas feed,” J. Nat. Gas Sci. Eng., vol. 31, pp. 585–588, Apr. 2016, doi: 10.1016/j.jngse.2016.03.045.
A. D1835-13, “Standard Specification for Liquefied Petroleum (LP) Gases,” ASTM Int. West Conshohocken, PA, USA, 2013, [Online]. Available: www.astm.org
P. 3 Petroleum Products Sectional Committee, “Indian Standard LIQUEFIED PETROLEUM GASES --- SPECIFICATICAN (Second Revision),” Burau Indian Stand., 1999.
C. P. Cho, O. S. Kwon, and Y. J. Lee, “Effects of the sulfur content of liquefied petroleum gas on regulated and unregulated emissions from liquefied petroleum gas vehicle,” Fuel, vol. 137, pp. 328–334, 2014.
R. J. Falkiner, “Liquefied petroleum gas,” Fuels Lubr. Handb., pp. 31–59, 2003.
A. D1835-13, “Standard Specification for Liquefied Petroleum (LP) Gases,” ASTM Int. West Conshohocken, PA, USA, 2013.
Jenifer and D. J. Aravindhar, “Iot Based Air Pollution Monitoring System Using Esp8266-12 With Google Firebase,” J. Phys. Conf. Ser., vol. 1362, no. 1, p. 012072, Nov. 2019, doi: 10.1088/1742-6596/1362/1/012072.
J. Tisa, J. Lepika, and J. Nedumaan, “Domestic robot for LPG and AC gas leakage detection,” Int. J. Comput. Appl., vol. 975, p. 8887, 2019.
A. G. C. Lane and P. Rice, “Comparative assessment of the performance of the three designs for liquid jet mixing,” Ind. Eng. Chem. Process Des. Dev., vol. 21, no. 4, pp. 650–653, 1982.
M. S. Amin, N. Ibrahim, and Z. Zakaria, “Minimising Butadiene Level in Liquefied Petroleum Gas (LPG) via Non-Stirred Blending with Numerical Approach,” Malaysian J. Fundam. Appl. Sci., vol. 19, no. 2, pp. 129–141, 2023.
American Chemistry Council’s Olefins Panel Butadiene Product Stewardship Task Group.(200)., “Product Stewardship guidance manual: Butadiene.[Online].,” Available: https://www.americanchemistry.com/ProductsTechnology/Olefins/Butadiene-Product-Stewardship-Guidance-Manual.pdf, [Online]. Available: https://www.americanchemistry.com/ProductsTechnology/Olefins/Butadiene-Product-Stewardship-Guidance-Manual.pd
Y. Gao, J. Li, and C. J. Zhu, “Composition and source of residue in fuel supply system of LPG vehicle,” Chi. J. Jilin Univ, vol. 37, pp. 1251–1256, 2007.
K. P. Sharma, “About LPG Safety,” Fire Eng., vol. 29, no. 4, pp. 25–28, 2004.